PATTERN SEALER 946mL
Click Picture for more Info
The purpose of pattern sealer is to seal the porous surface of the pattern.
The purpose of pattern sealer is to seal the porous surface of the pattern. This provides a smoother surface to release from. Size: 1L Part # 63522
Featured positive reviews:
Works very well. Fast and easy to build up and sand smooth. Starting layup this weekend.
Average rating:HONEY WAX RELEASE AGENT WAXCan$46.9255054Click Picture for more Info
Compounded with the purest grade carnauba wax, plus special binders and spreading agents, Honey Waxx has been the leading choice in mould release agents for decades.
PVA LIQUID - 1LCan$25.6255422Click Picture for more Info
PVA should be used to aid in the release of parts from a mold. It should be applied in three thin mist coats over...Application videos using PVA.PVA application @ 9:40 PVA application @ 8:35Polyvinyl alcohol (PVA) is often utilized as a mold release agent in industries such as plastics, rubber, and composites. Here's how it works:- Coating: PVA can be applied as a thin film or coating onto the surface of a mold or other surface where sticking might occur.
- Barrier: Once applied, the PVA forms a barrier between the surface and the material being molded or worked with, preventing adhesion.
- Water Solubility: PVA is water-soluble, which means that after the molding process is complete, the PVA can be easily washed away with water, leaving behind the molded object.
- Smooth Finish: PVA can also contribute to a smoother surface finish on the molded object, as it helps in preventing imperfections caused by sticking.
It's important to note that while PVA can be effective as a release agent in certain applications, its performance depends on the specific materials, processes, and conditions involved. For other applications, different types of release agents might be more suitable. Always ensure to test the compatibility and effectiveness of any release agent in your specific use case before widespread application.
Wedge 1 1/4 INCH X 4 INCHCan$3.9965120Click Picture for more Info
These wedges are a must for removing parts from fibreglass composite moulds.
Average rating:G860-2.5 Gelcoat HVLP Spray GunCan$189.9965321
Click Picture for more Info
This full size professional grade HVLP gun comes complete with a 2.5mm stainless nozzle, 0.6 litre plastic cup and plastic material strainer.
