206C Slow Hardener GAL
Average rating:
(1)Click Picture for more info
Can$310.79
SKU 00092
Features are:
- Excellent for extended working at higher temperatures
- Pot life at 72°F (22°C): 20 to 25 minutes
- Cure to a solid state: 10 to 15 hours
- Cure to maximum strength: 1 to 4 days
- Minimum recommended temperature: 60°F (16°C)
- 3lb / 1.36 kg
This is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
Click here for The West System Technical Data (pdf)
Click here for hardener selection guide
Featured positive reviews:
Can't beat Rayplex and West System. Delivered on time, even during COVID which allowed me to continue my project.
The 206 is best for room temperature and a little warmer, up to 24C. Otherwise, it just gels too fast. The Fast hardner should just be used when 20C or below or you have a small project.
